How to Find a Fiat 500 Spare Key
Fiat's iconic 500 has become an iconic car since its relaunch in 2007. The company is now launching an aggressive campaign to other powertrains, including a hybrid version.
The replacement of key fob batteries on a Fiat 500 are simple and affordable. The Fiat main dealer will provide the key in approximately 10 days.
Fault Diagnosis
The key fob is equipped with an electronic chip that communicates with the Fiat immobiliser system to ensure that only authorised cars are able to start the engine. If the transponder chip inside the key fob is damaged, it won't be able to link up to the immobiliser unit, which means your car will refuse to start.
It is possible to repair a key fob that has been damaged, as long that the chip isn't physically harmed. A professional locksmith can assist with this, and will make use of dealer-standard technology to fix it quickly and efficiently.
It is possible to utilize an OBD scanner to determine whether your fob is in communication with the receiver module. This is a simple process and can provide an initial indication of the root cause. If the OBD scanner shows that there is no communication between the receiver and transmitter modules, it may be required for the fob's transmitter module to be replaced. This can be a costly alternative, and is best left to an expert locksmith.
Dead Coin Battery
A dead battery for the coin is the most frequent reason for a key fob to not function. This is a simple fix that only takes just a few minutes. Check that the key fob is seen by your vehicle. Then, try pressing the "Lock" or "Unlock" button to determine if the key fob responds.
The key fob may not work at all, or perhaps only occasionally, if it's out of range. This could be an indication that the circuit board inside the key fob has gone out of date. You'll have to refer to the owner's guide to get instructions on how to reprogram the key fob in this instance.
The mechanical latch can be removed from the back of the key fob. (See the image below). Then, gently pry the edge of the battery holder away from the switch to take out the old coin-cell battery. Insert a new #CR2032 3 volt battery into the fob with the "+ side" facing the rear cover and the "- side" looking down towards the rubber buttons.
Water Damage
Although the key fob has rubber seals that keep water out of the electronic chip, it's not waterproof. The key fob may be able to handle water from a shower or water from a wash cycle however, submerging it into ocean or pool waters is not recommended.
The key fob will have to be reprogrammed if the device is exposed to water. This process can be done by following instructions in the owner's manual or by bringing it to an auto locksmith professional or a Fiat dealer.
A fob that's not in range may stop working. Key fobs typically have a range of around 30 feet, and if they're too far away from your vehicle, it won't be able to recognize them. fiat punto car key to try is to move closer to your car. If this does not work, you may need to replace your key fob. You can find information on how to replace the battery in most vehicles on YouTube or by consulting the owner's manual. This is the perfect time to consider getting a replacement key fob if the one you have is starting to look scruffy and dented.
Faulty Receiver Module
Modern models of Fiat do not require the use of a key to start or open the car. The cars are equipped with an electronic remote control that sends an electronic message to the car in order to turn the engine off and on. A locksmith can repair the damaged keyfob. You will save time and money by leaving this work to the professionals. They can also program the new key for your Fiat.
You'll have to give the locksmith a few details over the phone when you want a spare Fiat key. You'll need to provide the locksmith details regarding your car, including the year it was manufactured and the model. This is important as locksmiths require it to ensure that the new key is compatible with the locks in place.
There are not many locksmiths who can make replacement keys for Fiat automobiles. Choose a locksmith who has an excellent track record and experience in the field. You can be assured that the key will work for your vehicle and you won't lose money.
Keys that are unpaired
If you have a key fob that stopped functioning, the most likely reason is an unresponsive coin battery. The key fob is equipped with metal clips that keep the battery in place and complete the circuit. If these clips wear out or loose, they could cause contact issues and loss of power. Replace the battery with one with the same size, voltage, and specification, or use a spare.
If the key fob was submerged in water, it is essential to dry it before re-inserting it. The use of isopropyl alcohol or electronic cleaner is a good method to accomplish this. It is also recommended that you remove the battery, clean the circuit board, and replace it prior to replacing.
If you are unable to locate a spare key, the best solution is to contact locksmith. A licensed locksmith can reprogram the Fiat transponder key without having to see the original keys. This is a speedier and less expensive option rather than waiting for the original Fiat key from Italy to arrive. A professional locksmith has the necessary tools and equipment to replace your keys as quickly as is feasible.
